User`s manual

Multi-WAN VPN QoS Router
122
This remote gateway authentication type (Remote Security Gateway Type) must be identical
to the remotely-connected local security gateway authentication type (Local Security Gateway
Type).
Remote Security
Gateway Type:
This remote gateway authentication type comes with five
operation modes, which are:
IP only-Authentication by use of IP only
IP + Domain Name (FQDN) Authentication, -IP +
Domain name
IP + E-mail Addr. (USER FQDN) Authentication, -IP +
Email address
Dynamic IP + Domain Name (FQDN) Authentication,
-Dynamic IP address + Domain name
Dynamic IP + E-mail Addr. (USER FQDN)
Authentication. Dynamic IP address + Email address name
(1) IP only:
If users select the IP Only type, entering this IP allows users
to gain access to this tunnel.
If the IP address of the remote client is unknown, choose IP
by DNS Resolved, allowing DNS to translate IP address.
When users finish the setting, the corresponding IP address
will be displayed under the remote gateway of Summary.
Or users can choose IP by Multiple DNS Resolved, and IP
address can be translated through DNS. When users finish
the setting, the corresponding IP address will be displayed
under the remote gateway of Summary.