User`s manual

Multi-WAN VPN QoS Router
9
III. Hardware Installation
In this chapter we are going to introduce hardware interface as well as physical installation.
3.1 VPN Router LED Signal
LED Signal Description
LED
Color
Description
Power
Green
Green LED on: Power ON
DIAG
Amber
Amber LED on: System self-test is running.
Amber LED off: System self-test is completed
successfully.
LAN/WAN/DMZ:
10M- Speed
Off
Ethernet is running at 10Mbps.
LAN/WAN/DMZ:
100M- Speed
Amber
Ethernet is running at 100Mbps.
LAN/WAN/DMZ:
1000M- Speed
Green
Ethernet is running at 1000Mbps.
WAN/DMZ:
Green
Green LED on: WAN is connected and gets the IP address.
Green LED Blinking: Packets are transmitting through
Ethernet port.
Green LED off: WAN can not get the IP address.
LAN
Green
Green LED on: LAN is connected.
Green LED Blinking: Packets are transmitting through
Ethernet port.
USB
Green
Green LED on: USB is connected and the device is
supported.
Green LED Blinking: Packets are transmitting through
USB port.
Reset
Action
Description
Press Reset Button For 5 Secs
Warm Start
DIAG indicator: Amber LED flashing slowly.
Press Reset Button Over 10 Secs
Factory Default
DIAG indicator: Amber LED flashing quickly.