User`s manual

Multi-WAN VPN QoS Router
115
Phase2
Encrypt/Auth/Gro
up:
Displays settings such as encryption (DES/3DES),
authentication (MD5/SHA1) and Group (1/2/5).
If users select Manual setting for IPSec, Phase 2 DH group will
not display.
Local Group:
Displays the setting for VPN connection secure group of the
local end.
Remote Group:
Displays the setting for remote VPN connection secure group.
Remote Gateway:
Set the IP address to connect the remote VPN device. Please
set the VPN device with a valid IP address or domain name.
Control:
Click “Connect” to verify the tunnel status. The test result will
be updated. To disconnect, click “Disconnect” to stop the VPN
connection.
Config:
Setting items include Edit and Delete icon.
Click on Edit to enter the setting items and users may change
the settings. Click on the trash bin icon and all the tunnel
settings will be deleted.
__ Tunnel(s)
Enabled:
__ Tunnel(s)
Defined:
This displays how many tunnels are enabled and how many
tunnels are set.
VPN Group Tunnel Status:
If there is no setting for Group VPN, there will be no display of VPN Group status.
Group Name:
Displays the tunnel name of the Group VPN that is connected.
Connected Tunnels:
Displays the VPN Groups tunnel numbers.