User`s manual

Multi-WAN VPN QoS Router
114
VPN Tunnel Status:
The following describes VPN Tunnel Status, the current status of VPN tunnel in detail:
Previous
Page/Next Page,
Jump to __/__
Page, __ Entries
Per Page
Click Previous page or Next page to view the desired VPN
tunnel page. Or users can select the page number directly to
view all VPN tunnel statuses, such as 3, 5, 10, 20 or All.
Tunnel No.
To set the embedded VPN feature, please select the tunnel
number. It supports up to 300 IPSec VPN tunnel Setting
(gateway to gateway as well as client to gateway).
Status:
Successful connection is indicated as-(Connected).
Failing hostname resolution is indicated as - (Hostname
Resolution Failed).
Resolving hostname is indicated as -(Resolving Hostname)
Waiting to be connected is indicated as - (Waiting for
Connection).
If users select Manual setting for IPSec setup, the status
message will display as ―Manual‖ and there is no Tunnel test
function available for this manual setting.
Account ID:
Displays the current VPN tunnel connection name, such as XXX
Office. Users are well-advised to give them different names to
avoid confusion should users have more than one tunnel
settings.
Note: If this tunnel is to be connected to other VPN device (not
this device), some device requires that the tunnel name is
identical to the name of the host end to facilitate verification.
This tunnel can thus be successfully enabled.