User`s manual

Multi-WAN VPN QoS Router
7
#
Setting
Content
Purpose
1
Hardware installation
Configure the
network to meet
user’s demand.
Install VPN Router hardware based on
user physical requirements.
2
Login
Login the device
with Web Browser.
Login VPN Router web-based UI.
3
Verify device specification
Verify Firmware
version and
working status.
Verify VPN Router specification,
Firmware version and working status.
Set password and time
Set time and
re-new password.
Modify the login password considering
safe issue.
Synchronize the VPN Router time with
WAN.
4
Set WAN connection
Verify WAN
connection setting,
bandwidth
allocation, and
protocol binding.
Connect to WAN. Configure bandwidth
to optimize data transmission.
5
Set LAN connection:
physical port and IP
address settings
Set mirror port and
VLAN. Allocate and
manage LAN IP.
Provide mirror port, port management
and VLAN setting functions. Support
Static/DHCP IP allocation to meet
different needs. IP group will simplize
the management work.
6
Set QoS bandwidth
management: avoid
bandwidth occupation
Restrict bandwidth
and session of
WAN ports, LAN IP
and application.
To assure transmission of important
information, manage and allocate the
bandwidth further to achieve best
efficiency.
7
Set Firewall: prevent
attack and improper
access to network
resources
Block attack, Set
Access rule and
restrict Web
access.
Administrators can block BT to avoid
bandwidth occupation, and enable
access rules to restrict employee
accessing internet improperly or using
MSN, QQ and Skype during working
time. They can also protect network
from Worm or ARP attacking.