Specifications

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
92 PN: 1725-36038-001_N.docx
Softkeys
Softkey
Name
Displayed during…
Press to…
<< Cursor backward Entering a dial number. Move the cursor back one position.
>> Cursor forward Entering a dial number. Move the cursor forward in
alphanumeric mode, if the cursor is
at the end of the line, adds a space
character.
Answ Answer Incoming call on the selected
line.
Answer the call (equivalent to START
key).
Bksp Backspace
character
Entering a dial number. Delete the character prior to the
cursor position.
Back Back one screen Displaying a menu. Exit the menu.
End End Call An active call on the selected
line.
Terminate the call without going back
to standby mode.
Favr Favorites Prior to entering the first
character of a dial number
Activate the Favorites menu.
Logs Call Logs Standby mode Open the Call Log menu.
Hold Hold In an active call. Place the call on hold. The line status
shows when the call is on hold or
when audio is flowing.
Msg Message Initial dial screen when new
line is selected and a dial
tone is active prior to
entering first character of the
number to be dialed.
Initiate a call to the specified
message center contact address for
retrieval or administration of
voicemail.
Mute Toggle muting In an active call. Toggle audio transmission to the far
end. The line status shows when
not muted or when muted.
OK OK Power up registration if
username is not configured
in Admin menu.
Send the username and password to
the SIP server for authorization to
register the handset.
Redl Redial Prior to entering the first
character of a dial number.
Redial the last number that was
dialed.
Rej Reject Incoming call on the selected
line.
Reject the incoming call. The SIP
server will then redirect the call
elsewhere.
Resm Resume In an active call and you
have placed the call on hold
or in standby mode if any call
is on hold.
Resume a call that was previously
placed on hold or that went on hold
when another line was activated.
Save Save Entering a dial number as a
forward destination.
Save the dial number as the
forwarding destination for the
selected line.