Specifications

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
70 PN: 1725-36038-001_N.docx
server over the air. When the authentication method is PEAP or
EAP-FAST manual provisioning , the credential on the phone is
deleted and a new one needs to be downloaded through the HAT.
See additional details in WPA2 Enterprise PEAP Certificate
Enrollment and EAP-FAST Manual PAC Provisioning section
later in this chapter.
Custom – QoS
SVP mode uses the SVP Server to provide enterprise-grade QoS.
DSCP tags are used to change the priority settings for various
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be
overwritten:
WT in call = 46, WT standby = 26, Other = 0.
Wi-Fi Standard QoS mode uses standards-based traffic controls for QoS,
instead of the SVP Server.
DSCP tags are used to change the priority settings for various
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be
overwritten:
Voice = 46, Control = 26, Other = 0.
Admission Cntrl is used to enable and disable the use of WMM
Admission Control by the handset for the AC_VO and AC_VI
access categories. If the WLAN is using WMM Admission
Control, the handset should be set to
*Mandatory. If the WLAN is
not using WMM Admission Control, the handset should be set to
*Optional. See Best Practices Guide for Deploying SpectraLink
8020/8030 Wireless Telephones for a detailed explanation of the use
of WMM Admission Control.
CCX
CCX settings configure the handset for operation as a CCX V4
certified client.
WPA2-Enterprise
The Authentication setting can select either *EAP-FAST or PEAP as the
authentication method for RADIUS server. See the System
Components section for tested models.
Note that for
Fast Handoff, the only selection available is *CCKM.
Username: Enter a username that matches an entry on your
RADIUS server. Alphanumeric strings can be entered using the
alphanumeric string entry technique.
Password: Enter the password that corresponds to this username.