Specifications

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
68 PN: 1725-36038-001_N.docx
SSID
Enter the SSID.
WLAN Settings
Select between Custom and CCX modes. The Custom mode allows
explicit control of all of the security and QoS settings. Using CCX
mode automatically enables the CCXv4 features and functions, with
only the 802.1X mechanism needing to be selected.
Custom – Security
Handset security setting should match exactly the settings in your
APs. Consult the VIEW Configuration Guide for the APs installed in
your facility for information on which of the security methods are
certified.
Encryption keys, Username and Password display as they are
entered. For security reasons, these items will not display when a
user returns to the Administration menu.
*NONE disables any 802.11 encryption or security authentication
mechanisms.
WEP (Wired Equivalent Privacy) is a wireless encryption protocol that
encrypts data frames on the wireless medium allowing for greater
security in the wireless network. If WEP is required at this site, you
must configure each handset to correspond with the encryption
protocol set up in the APs. Select the entries from the options below to
enable the handset to acquire the system.
Authentication
Select either Open System or Shared Key.
WEP Enable/Disable
Select either Enable WEP or Disable WEP.
Key Information
Default
Key Enter the key number specified for use by the
handsets. This will be
1 through 4.
Key Length Select either 40-bit or 128-bit depending on the key
length specified for use at this location.
Key 1-4 Scroll to the key option that corresponds to the Default
Key that was entered above. Enter the encryption key as a
sequence of hexadecimal characters. (Use the
2 and 3 keys to
access hexadecimal digits A through F.