Specifications

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
114 PN: 1725-36038-001_N.docx
Message type Errors Events Full
Probe Recovery No Yes Yes
DCA unknown MgmtAction Yes Yes Yes
txMissedIrptPatchCnt No Yes Yes
SIP Specific Syslog Messages
Number of methods in header exceed maximum
size
Yes Yes Yes
SIP <method> request received from <ipaddr> No Yes Yes
SIP <method> request sent to <ipaddr> No Yes Yes
SIP <code> response received from <ipaddr> No Yes Yes
SIP <code> response sent to <ipaddr> No Yes Yes
Call established to <ipaddr> No Yes Yes
Call terminated to <ipaddr> No Yes Yes
Invalid SIP <method> request received from
<ipaddr>, rc <code>
Yes Yes Yes
Invalid SIP <code> response received from
<ipaddr>, rc <code>
Yes Yes Yes
Invalid value for <parameter> in generic
configuration file
Yes Yes Yes
Invalid value for <parameter> in specific
configuration file
Yes Yes Yes
Value too long for <parameter> in generic
configuration file
Yes Yes Yes
Value too long for <parameter> in specific
configuration file
Yes Yes Yes
Download aborted code incompatible. Error=#### Yes Yes Yes
DCA unknown MgmtAction category code=### Yes Yes Yes
CHARGER-Battery temp out of range Yes Yes Yes
SNMP
SNMP Get commands may be issued to the handset from an SNMP
remote application if SNMP is enabled on the handset. SNMP Set and
Trap commands are not supported except for a Set command for a
single parameter to allow remotely enabling or disabling SNMP. An
SNMP address and public or private community strings must be
configured and SNMP enabled on the handset for SNMP Get
commands to be processed. An SNMP address and private
community string must be configured on the handset for SNMP Set
commands to be processed.