Specifications

Diagnostic Tools
PN: 1725-36038-001_N.docx 113
Jan 21 19:50:46.00 0090.7a05.18f6 (172.029.076.067)
[0000]
The handset header contains the date and time, but this time from the
handset’s clock, followed by the Phone’s MAC (Media Access
Control) address, the phone’s IP address in parentheses, and a
message number in brackets.
If the handset is not configured to use the SNTP (Simple Network
Time Protocol) to determine the correct date and time, it will set its
clock to midnight, January 1, 2001 on power up.
The message number starts at 0 on power up, and increments for
every Syslog message sent. Note that the message number is in
hexadecimal.
The remainder of the Syslog message is the message itself, and can be
any text, and often includes data as well as the text.
Syslog Messages
The table below lists the syslog messages and which level of logging
will produce them:
Message type Errors Events Full
SW ERROR Yes Yes Yes
CHARGER-Placed in charger No Yes Yes
CHARGER-Removed from charger No Yes Yes
CHARGER-Vbat: 4187mV No Yes Yes
CHARGER-Charge complete No Yes Yes
Handoff report No Yes Yes
Failed Handoff Yes Yes Yes
In-Call Syslog Messages
Call Start No Yes Yes
Call End No Yes Yes
AStat No Yes Yes
AThresh Yes Yes Yes
NStat No Yes Yes
NThresh Yes Yes Yes
Rare Syslog Messages
CHARGER Battery temp out of range No Yes Yes
CHARGER Battery temp out of range in unit No Yes Yes
Download aborted, code incompatible Yes Yes Yes
DCA initiated radio reset No Yes Yes
LockUpRecovery Yes Yes Yes