User manual

5. Connect TX+ and RX+ with twist pair (**) as data output D+. Connect TX-
and RX- as data input D-.
6. Connect D+ and D- to the RS-485 data control input (***) of high speed
dome camera.
Note:
* Sony VISCA uses RS-232 port. This control wire is not applicable.
** For the communication control wires compatible with RS-485, please refer to
the recommended wire list in the user manual.
*** DynaColor D7720A is used as an example. The RS-485 design varies among
different high speed dome providers. Please refer to the relevant user manuals
for reference.
- 83 -