User manual

Motion Detection
VioGate provides up to 256 detection areas to replace the monitoring screen of
your camera. When motion detection is enabled, any movement detected in the
monitoring area will trigger a notification sent by the system. Select area of
focus for motion detection. Click Advanced under Motion Detection, and select
the camera movement and its dissection. Then select the sensitivity of motion
detection for the specified area. It is recommended to select higher sensitivity
level if the camera is located in indoor environment. If the camera is located in
outdoor environment where motion often occurs, it is recommended to select
lower sensitivity level for motion detection.
VioGate also supports motion detection for multiple time periods according to your
selection.
- 45 -