User manual

• Assign IP address settings manually
Specify the IP address and other settings if you are using ADSL connection
service. If the server’s external network uses ADSL service to connect to the
Internet, specify a valid IP address provided by the ISP. Enter the following
settings:
- IP address
- Subnet Mask
- Gateway
• Use broadband connection to the Internet (PPPoE)
PPPoE is often used in dial-up ADSL broadband service. Enter the user name
and password provided by the ISP to connect to the Internet.
The server will use DHCP for network connection when PPPoE connection fails.
• Enable Dynamic DNS service
Note: If you assign IP address settings manually to connect to the
Internet, and want to enable dynamic DNS service, specify a DNS
server.
To enable external access to VioGate by a domain name, activate dynamic
domain name service. Apply for an account and register a dynamic domain
name from a dynamic domain name service provider. Please refer to
Appendix B for further details. After you have registered a dynamic domain
name and completed the setup, VioGate will automatically update the dynamic
IP address with the service provider’s server.
• Specify DNS Server
To assign a specific DNS server, enter the server’s IP address.
• Enable Multicast
Multicast enables the server to broadcast data to a specified group of clients
simultaneously to control network flow.
- 30 -