User's Manual

Table Of Contents

LCD Panel

The LCD panel allows you to perform the following operations:

• Restart and power off the NAS

• Configure or change the LCD panel password

• View and configure network settings

• View information on the system, physical disks, and volumes

Viewing TCP/IP Settings

You can view the following settings for each network adapter on the NAS:

• IP address

• Subnet mask

• Default gateway

• Primary DNS

• Secondary DNS

1. Press Enter or Select.

The panel displays the NAS name and QTS version.

2. Press and hold Enter for two seconds.

The panel displays Main Menu 1. TCP/IP.

3. Press and hold Enter.

The panel displays the IP address of the first network adapter.

4. Press and hold Select to view the next TCP/IP screen.

5. Optional: Repeat step 4 as necessary.

Configuring TCP/IP Settings

You can configure the following settings for each network adapter on the NAS: