User manual
Table Of Contents
- Notice
- Getting Started
- QTS Basics and Desktop
- System Settings
- Privilege Settings
- Network Services
- Applications
- QNAP Applications
- Use the LCD Panel
- GNU GENERAL PUBLIC LICENSE
77
4.2.5.3 Advanced ACL
Note:
The description below applies to non Intel-based NAS models running firmware
version
3.3.0 or later
and Intel-based NAS models running firmware version
3.2.0 or
later
only.
You can create LUN masking policy to configure the permission of the iSCSI initiators
which attempt to access the LUN mapped to the iSCSI targets on the NAS. To use this
feature, click "Add a Policy" under "Advanced ACL".
Enter the policy name, the initiator IQN, and assign the access right for each LUN
created on the NAS.
Read-only: The connected initiator can only read the data from the LUN.
Read/Write: The connected initiator has read and write access right to the LUN.
Deny Access: The LUN is invisible to the connected initiator.
If no LUN masking policy is specified for a connected iSCSI initiator, the default policy will
be applied. The system default policy allows read and write access from all the
connected iSCSI initiators. You can click "Edit" to edit the default policy.
Note:
Make sure you have created at least one LUN on the NAS before editing the
default LUN policy.
Hint: How do I find the initiator IQN?
Start Microsoft iSCSI initiator and click "General". You can find the IQN of the initiator as
shown below.