User manual

32
Migrating your NAS
Follow the steps below to perform system migration:
1. Turn off the source NAS and unplug the hard drives.
2. Remove the hard drives from the old trays and install them to the hard drive trays
of the new NAS.
3. Plug the hard drives to the destination NAS (new model). Make sure the hard drives
are installed in the original order.
4. Follow the instructions of the Quick Installation Guide (QIG) to connect the power
supply and network cable(s) of the new NAS.
5. Turn on the new NAS. Login the web administration interface as an administrator
(default login: admin; password: admin).
6. If you are informed to update the firmware of the new NAS, follow the instructions
to download and install the firmware.
7. Click "Start Migrating". The NAS will restart after system migration. All the data and
settings will be retained.
Caution: To avoid system damage or serious injuries, the system m igration
procedure should be perform ed by an authorized server m anager or IT
adm inistrator .
Some system settings will be removed after system migration due to a different system
design. Configure the following settings again on the new NAS:
Windows AD
Some apps need to be reinstalled.