User manual
Table Of Contents
- Notice
- Getting Started
- QTS Basics and Desktop
- System Settings
- Privilege Settings
- Network Services
- Applications
- QNAP Applications
- Use the LCD Panel
- GNU GENERAL PUBLIC LICENSE
281
Note:
In order to use this application, you are required to use the mouse function
on the Qremote, or use the USB mouse directly connected to the NAS.
YouTube
Enjoy the YouTube contents via the HD Station.
MyNAS
Enter the local NAS administration web page to view the NAS functions and settings.
Configuring HD Station
Configure the HD Station by choosing "Settings" at the HD Station portal.
App: The applications can be enabled or disabled in this feature.
Display: Here you may change the screen resolution and set up to turn off the
screen after an amount of idle time.
Preferences: Here you may change the language or type of remote control and
audio output. The default setting is HDMI. If you have a USB sound card installed,
you can choose that option in the NAS Audio Output.
Note:
Only the QNAP remote or MCE remote control is supported. NOT all the TS-
x69 models support the internal remote control and the TS-x70 models only support
the MCE remote control.
Remote Control