User manual
Table Of Contents
- Notice
- Getting Started
- QTS Basics and Desktop
- System Settings
- Privilege Settings
- Network Services
- Applications
- QNAP Applications
- Use the LCD Panel
- GNU GENERAL PUBLIC LICENSE
158
6.4 SNMP Settings
Enable SNMP (Simple Network Management Protocol) service on the NAS and enter the
trap address of the SNMP management stations (SNMP manager), for example, PC with
SNMP software installed. When an event, warning, or error occurs on the NAS, the NAS
(SNMP agent) reports the real-time alert to the SNMP management stations.
The fields are described as below:
Field
Description
SNMP Trap Level
Select the information to be sent to the SNMP
management stations.
Trap Address
The IP address of the SNMP manager. Specify maximum
3 trap addresses.
SNMP MIB
(Management
Information Base)
The MIB is a type of database in ASCII text format used
to manage the NAS in the SNMP network. The SNMP
manager uses the MIB to determine the values or
understand the messages sent from the agent (NAS)
within the network. You can download the MIB and view
it with any word processor or text editor.