User manual

138
ISO Shared Folders
You can mount the ISO image files on the NAS as ISO shares and access the contents
without disc burning. The NAS supports mounting up to 256 ISO shares.
TS-110, TS-119, TS-120, TS-121, TS-210, TS-219, TS-219P, TS-220, TS-221, TS-410,
, TS-119P+, TS-219P+, TS-112, TS-212 support maximum 256 network shares only
(including 6 default network shares). The maximum number of ISO image files supported
by these models is less than 256 (256 minus 6 default shares minus number of network
recycle bin folders).
Follow the steps below to mount an ISO file on the NAS by the web interface:
1. Login the NAS as an administrator. Go to "Share Folders" > "Create". Click "Create
an ISO Share".
2. Select an ISO image file on the NAS. Click "Next".
3. The image file will be mounted as a shared folder of the NAS. Enter the folder name.
4. Specify the access rights of the NAS users or user groups to the shared folder. You
can also select "Deny Access" or "Read only" for the guest access right. Click "Next".
5. Confirm the settings and click "Next".
6. Click "Finish".
7. After mounting the image file, you can specify the access rights of the users over
different network protocols such as SMB, AFP, NFS, and WebDAV by clicking the
Access Permission icon in the "Action" column.
The NAS supports mounting ISO image files by the File Station. Please refer to the
chapter on File Station for details.
Note: For ARM based NAS models, Cyrillic characters are not supported for the name
of a subfolder in an ISO shared folder (the name will not be correctly displayed if that
subfolder is created with a Cyrillic name.) Please name the subfolder with a different
language before an ISO file is created.
Folder Aggregation
You can aggregate the shared folders on Microsoft network as a portal folder on the NAS
and let the NAS users access the folders through your NAS. Up to 10 folders can be
232