User manual

127
5.1 Users
The NAS has created the following users by default:
admin: The administrator "admin" has full access to system administration and all
shared folders. It cannot be deleted.
guest: This is a built-in user and will not be displayed on the "User Management"
page. A guest does not belong to any user group. The login password is "guest".
anonymous: This is a built-in user and will not be shown on the "User Management"
page. When you connect to the server by FTP, you can use this name to login.
The number of users you can create on the NAS varies according to the NAS models. If
your NAS models are not listed, please visit http://www.qnap.com for details.
Maxim um num ber of
users
NAS m odels
1,024
TS-110, TS-210
2,048
TS-112, TS-119, TS-119P+, TS-212, TS-219P+, TS-410,
TS-239 Pro II+, TS-259 Pro+
4,096
TS-412, TS-419P+, TS-410U, TS-419U, TS-412U, TS-
419U+, SS-439 Pro, SS-839 Pro, TS-439 Pro II+, TS-459U-
RP/SP, TS-459U-RP+/SP+, TS-459 Pro+, TS-459 Pro II,
TS-559 Pro+, TS-559 Pro II, TS-659 Pro+, TS-659 Pro II,
TS-859 Pro+, TS-859U-RP, TS-859U-RP+, TS-809 Pro, TS-
809U-RP, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-
EC879U-RP, TS-1279U-RP, TS-EC1279U-RP
The following information is required to create a new user:
Username: The username is case-insensitive and supports multi-byte characters,
such as Chinese, Japanese, Korean, and Russian. The maximum length is 32
characters. The invalid characters are: " / \ [ ] : ; | = , + * ? < > ` '
Password: The password is case-sensitive and supports maximum 16 characters. It is
recommended to use a password of at least 6 characters.
Creating a User
To create a user on the NAS, follow the steps below:
1. Go to "Control Panel" > "Privilege Settings" > "Control Panel" > "Users".
2. Click "Create" > "Create a User".