User manual
Table Of Contents
- Notice
- Getting Started
- QTS Basics and Desktop
- System Settings
- Privilege Settings
- Network Services
- Applications
- QNAP Applications
- Use the LCD Panel
- GNU GENERAL PUBLIC LICENSE
105
4.9 Backup/Restore
Go to "Control Panel" > "System Settings" > "Backup/Restore" to back up, restore your
NAS or restore your NAS to factory default.
Backup/Restore Settings
Back up System Settings:
To back up all the settings, including the user
accounts, server name, network configuration and so on, click "Backup" and select
to open or save the setting file.
Restore System Settings:
To restore all the settings, click "Browse" to select a
previously saved setting file and click "Restore".
Restore to Factory Default
Restore Factory Defaults & Form at all Volum es:
Restore system settings to default
and
form at all disk volum es
.
Reinitialize NAS: Erase all data
and reinitialize the NAS.
Caution:
The administrator password and system settings will be reset to default if
you press and hold the reset button on the back of the NAS for 3 seconds (but user
data on the disk will still be retained.) However, if you press and hold the Reset
button for 10 seconds, all settings such as users, user groups, and the shared folders
previously created will be cleared (but user data on the disk will still be retained.)