User manual
Table Of Contents
- Notice
- Getting Started
- QTS Basics and Desktop
- System Settings
- Privilege Settings
- Network Services
- Applications
- QNAP Applications
- Use the LCD Panel
- GNU GENERAL PUBLIC LICENSE
104
4. Click "Browse" to select the correct firmware image for the system update. Click
"Update System" to update the firmware.
The system update may take tens of seconds to several minutes to complete depending
on the network connection status. Please wait patiently. The NAS will inform you when
the system update has completed.
Note:
If the system is running properly, you do not need to update the firmware.
Update Firmware by Q NAP Qfinder
The NAS firmware can be updated by the QNAP Qfinder. Follow the steps below:
1. Select a NAS model and choose "Update Firmware" from the "Tools" menu.
2. Login the NAS as an administrator.
3. Browse and select the firmware for the NAS. Click "Start" to update the system.
Note:
The NAS servers of the same model on the same LAN can be updated by the
Finder at the same time. Administrator access is required for system update.