User manual

76
Ope ratio n p ro c e dure
In ‘Disk Management’ > ‘RAID Management’, select the disk volume for expansion and click ‘EXPAND
CAPACITY’.
Click ‘Change’ for the first HDD to be replaced. Follow the instructions to proceed.
Tip: After replacing the HDD, the description field shows the message ‘You can replace this drive’.
This means you can replace the HDD to a larger one or skip this step if the HDD have been replaced
already.
Ca utio n: When the hard drive synchronization is in process, do NOT turn off the NAS or
plug in or unplug the hard disk drives.