User manual

IPv 6 A uto Co nfiguratio n

If you have an IPv6 enabled router on the network, select this option to allow the NAS to acquire the

IPv6 address and the configurations automatically.

Use sta tic IP a ddre s s

To use a static IP address, enter the IP address (e.g. 2001:bc95:1234:5678), prefix length (e.g. 64),

and the gateway address for the NAS. You may contact your ISP for the information of the prefix

and the prefix length.

Enable Router Advertisement Daemon (radvd)

To configure the NAS as an IPv6 host and distribute IPv6 addresses to the local clients which

support IPv6, enable this option and enter the prefix and prefix length.

IPv 6 DNS se rv e r

Enter the preferred DNS server in the upper field and the alternate DNS server in the lower field.

You may contact your ISP or network administrator for the information. If you select IPv6 auto

configuration, leave the fields as '::'.