User manual

46
IPv 6
The NAS supports IPv6 connectivity with ‘stateless’ address configurations and RADVD (Router
Advertisement Daemon) for IPv6, RFC 2461 to allow the hosts on the same subnet to acquire IPv6
addresses from the NAS automatically. The NAS services which support IPv6 include:
Remote replication
Web Server
FTP
iSCSI (Virtual disk drives)
SSH (putty)
To use this function, select the option ‘Enable IPv6’ and click ‘Apply’. The NAS will restart. After the
system restarts, login the IPv6 page again. The settings of the IPv6 interface will be shown. Click
the Edit button to edit the settings.