User manual

38
On the TCP/IP Property page, configure the following settings:
Ne two rk S pe e d
Select the network transfer rate according to the network environment to which the NAS is
connected. Select auto negotiation and the NAS will adjust the transfer rate automatically.
Obta in the IP a ddre s s se ttings a uto m a tic a lly v ia DHCP
If your network supports DHCP, select this option and the NAS will obtain the IP address and
network settings automatically.
Use sta tic IP a ddre s s
To use a static IP address for network connection, enter the IP address, subnet mask, and default
gateway.
E na b le DHCP Se rv e r
If no DHCP is available on the LAN where the NAS locates, you can turn on this function to make the
NAS a DHCP server. The NAS will allocate dynamic IP address to the DHCP clients on the LAN.