User manual

313
15.2 USB One Touch Copy
This feature is not supported by TS-809U-RP.
You can configure the bahaviour of the USB one touch copy button on this page. The following three
functions are available:
Optio n s
De s c riptio n
Copy from the front USB storage to a
directory of the internal HDD of the NAS
1. Create directory: A new directory will be created on
the destination and the source data will be copied to
this directory. The new directory will be named as
the backup date (YYYYMMDD). If there are two or
more backups on the same day, the directory will be
named with YYYYMMDD-1, YYYYMMDD-2... and so on.
2. Copy: Back up data to the destination share folder.
If the same file exists, the destination file will be
overwritten.
3. Synchronize: Back up data to the destination share
folder and clear the redundant files. If the same file
exists, the destination file will be overwritten.
Copy to the front USB storage from a
directory of the internal HDD of the NAS
1. Copy: Back up data to the destination share folder.
If the same file exists, the destination file will be
overwritten.
2. Synchronize: Back up data to the destination share
folder and clear the redundant files. If the same file
exists, the destination file will be overwritten.
Disable the one touch copy button
Select this option to disable the copy button.
No te : If there are multiple partitions on the source storage device, a new folder will be created for
each partition on the destination as the backup folder. The backup folder will be named with the
backup date and the partition number, YYYYMMDD-1 for partition 1, YYYYMMDD-2 for partition
2... and so on. If the source storage device contains only one partition, the backup folder will be
named as YYYYMMDD only.