User manual

Follow the steps below to perform system migration.

Ca utio n:

To avoid server damage or serious injuries, the system migration procedure should

be performed by an authorized server manager or IT administrator.

1. Turn off the source NAS and unplug the HDD.

2. Remove the HDD from the old trays and install them to the HDD trays of the new NAS.

3. Plug the HDD to the destination NAS (new model). Make sure the HDD are installed in the

original order.

4. Follow the instructions of the Quick Installation Guide (QIG) to connect the power supply and

network cable(s) of the new NAS.

5. Turn on the new NAS. Login the web administration interface as an administrator (default

6. If you are informed to update the firmware of the new NAS, follow the instructions to download

and install the firmware.

7. Click 'Start Migrating'. The NAS will restart after system migration. All the data and settings

will be retained.

Some system settings will be removed after system migration due to different system design. You

may need to configure the following settings again on the new NAS.

Windows AD

Some QPKGs need to be resintalled (e.g. XDove)