User manual

286
6. Click ‘Set Config’ and enter the number of the maximum tasks you want to download at the
same time (Default number: 3).
Enter the maximum download rate (default value is 0, which means unlimited).
Enter the maximum upload rate (default value is 0, which means unlimited).
Enter the port range for Download Station (default range is 6881-6999).
Check UPnP NAT port forwarding to enable automatically port forwarding on UPnP supported
gateway (default is not checked).
Pro toco l E ncry ptio n
Some Internet Service Providers (ISP) block or throttle BitTorrent connections for the high
bandwidth it generates. By turning on ‘Protocol Encryption’ your connections will not be
distinguished by these ISPs as BitTorrent connections therefore are unable to block or throttle
them and causing slow connections or even no connections. However some ISPs are starting to
be able to identify these connections even if they were encrypted so users are suggested to
consider switching to an ISP that does not perform BitTorrent traffic throttling or blocking.
You can set the download schedule in ‘Download time settings’. Select ‘Continuous download’ to
download the files continuously. To specify the download schedule, select ‘Daily download time’
and enter the start and end time. If the end time value is smaller than the start time, the end
time will be treated as the time on the next day.