User manual

25
4. To configure the NAS, click ‘ADMINISTRATION’. Enter the administrator name and password.
Default user name: admin
Default password: admin
Note that if you login the administration interface with a user account without the administration
right, you can only change your login password.
5. You can turn on the option ‘SSL login’ (Secure Sockets Layer login) to allow secure connection to
the NAS.
No te : If your NAS is placed behind an NAT gateway and you want to access the NAS by
secure login from the Internet, you must open the port 443 on your NAT and forward this
port to LAN IP of the NAS.