User manual

181
Unic o d e Supp o rt
Turn on or off the Unicode support. The default setting is No. If your FTP client does not support
Unicode, you are recommended to turn off this option and select the language you specify in
‘General Settings’ > ‘Language’ so that the file and folder names can be correctly shown. If your FTP
client supports Unicode, enable Unicode support for both your client and the NAS.
A no ny m o us Lo g in
You can turn on this option to allow anonymous access to the NAS by FTP. The users can connect to
the files and folders which are open for public access. If this option is turned off, the users must
enter an authorized user name and password to connect to the server.
Pa ssiv e F T P Po r t Ra nge
You can use the default port range (55536-56559) or specify a port range larger than 1023. When
using this function, make sure you have opened the ports on your router or firewall.
F T P T ransfe r Lim ita tion
Specify the maximum number of FTP connections, maximum connections of a single user account
and the maximum upload/ download rates of a single connection.
Re spond with e x te rna l IP a d dre s s for p a ssiv e F T P co nne c tion re que s t
When passive FTP connection is in use, the FTP server (NAS) is behind a router, and a remote
computer cannot connect to the FTP server over the WAN, enable this function. When this option is
turned on, the NAS replies the IP address you specify or automatically detects the external IP
address so that the remote computer is able to connect to the FTP server.