User manual

169
Windows Server 2008
You may check the AD server name and domain name in ‘Control Panel’ > ‘System’.
a. This is your AD server name.
b. This is your domain name.
No te :
After joining the NAS to the Active Directory, the local NAS users who have access right to the
AD server should use ‘NASname\username’ to login; the AD users should use their own user
names to login the AD server.
The local NAS users and the AD users (with username as domain name + username) are
allowed to login the NAS (firmware version 3.2.0 or above) via AFP, FTP, Web File Manager, and
WebDAV. However, if the firmware version of the NAS is earlier than 3.2.0, only the local NAS
users are allowed to login the NAS by Web File Manager and WebDAV.
For TS-109/209/409/509 series NAS, if the AD domain is based on Windows 2008 Server, the
NAS firmware must be updated to version 2.1.2 or above.