User manual

117
C onne ct to the iSCSI targets by Microsoft iSC SI initiator on Windows
Before you start to use the iSCSI target service, make sure you have created an iSCSI target with a
LUN on the NAS and installed the correct iSCSI initiator for your OS.
iSCSI initia to r o n Windows
Microsoft iSCSI Software Initiator v2.07 is an official application for Windows OS 2003, XP, and 2000
to allow users to implement an external iSCSI storage array over the network. If you are using
Windows Vista or Windows Server 2008, Microsoft iSCSI Software Initiator is included. For more
information and the download location, visit:
http://www.microsoft.com/downloads/details.aspx?familyid=12cb3c1a-15d6-4585-b385-
befd1319f825&displaylang=en
Start iSCSI initiator from ‘Control Panel’ > ‘Administrative Tools’. Under the ‘Discovery’ tab click
‘Add Portal’. Enter the NAS IP and the port number for the iSCSI service.