User manual

100
Enter the CHAP authentication settings (optional) if your NAS is located on a public or untrusted
network. If you enter the user name and password settings under ‘CHAP’ only, only the iSCSI target
authenticates the initiator. In other words, the initiators have to enter the user name password to
connect to the target.
Mutual CHAP: Turn on this option for two-way authentication between the iSCSI target and the
initiator. The target authenticates the initiator using the first set of user name and password. The
initiator authenticates the target using the ‘Mutual CHAP’ settings.
F ie ld
Use r nam e lim ita tio n
Pa sswo rd lim ita tion
Use CHAP
authentication
The only valid characters are 0-
9, a-z, A-Z
Maximum length: 256 characters
The only valid characters are 0-
9, a-z, A-Z
Maximum length: 12-16
characters
Mutual CHAP
The only valid characters are 0-
9, a-z, A-Z, : (colon), . (dot),
and - (dash)
Maximum length: 12-16
characters
The only valid characters are 0-
9, a-z, A-Z, : (colon), . (dot),
and - (dash)
Maximum length: 12-16
characters