Operation Manual

96
4.2.1 Dashboard
The Dashboard provides an overview on the storage system set up on the NAS and
includes three sections: Volumes, Storage Pools and Disks.
They are described below:
Volumes: All available logic volumes, their capacity and type (Volume, LUN and
Unused) are indicated in this section. Click “New Volume” to create new volumes and
“Refresh” to refresh the list. For steps on creating volumes, please refer to the
chapter on Volumes .
Storage Pools: The status and capacity usage of each storage pool are listed in this
section. Click “New Storage Pool” to create new storage pools, and for steps on
creating storage pools, please refer to the chapter on Storage Pools .
Disk: The physical hard disk drives and their associated storage hosts (including both
the NAS and its connected expansion enclosures) are shown in this section. Click the
hard disk drive icon to bring up the Disk Health window. For details on the Disk Health
window, please refer to the chapter on Disks .
Click a logical volume in the Volumes section to check the storage pool that the volume
belongs to. Click the “up” or “down” arrow icon in front of a storage pool to check RAID
groups contained in that storage pool and check “Show members” inside a RAID group to
99
118
151