Operation Manual

819
Setting up the IP cameras
In this example, two IP cameras will be installed. Connect the IP cameras to your home
network. Then set the IP address of the cameras so that they are in the same LAN as
the computer. Login the configuration page of the Camera 1 by a web browser. Enter the
IP address of the first IP camera as 192.168.1.10. The default gateway should be set as
the LAN IP of the router (192.168.1.100 in this example). Then configure the IP address
of the second IP camera as 192.168.1.20.
Some IP cameras provide a utility for IP configuration. You may refer to the user manual
of the cameras for further details.
* Please refer to http://www.qnap.com for the supported network camera list.