Operation Manual

637
Note: To connect to the PPTP server on the Internet, the PPTP passthrough options
on some routers have to be opened. PPTP uses only port TCP-1723; forward this port
manually if your router does not support UPnP.
4. Register myQNAPcloud service: You can connect to the NAS by WAN IP or
myQNAPcloud name. To configure myQNAPcloud service, check the chapter on
myQNAPcloud Service or visit myQNAPcloud (http://www.qnap.com/
pro_application.asp?ap_id=637).
5. Add VPN users: Go to “Applications” > “VPN Service” > “VPN Client Management”,
click “Add VPN Users”. The local NAS users will be listed. Select the users who are
allowed to use the VPN service and their connection method (PPTP, OpenVPN, or
both). Click “Add”.