Operation Manual

605
Upon successful logon, the status of the target now shows “Connected”.
After the target has been connected Windows will detect its presence and treat it as if a
new hard disk drive has been added which needs to be initialized and formatted before
we can use it. Right click “My Computer” > “Manage” to open the “Computer
Management” window then go to “Disk Management” and a window should pop up
automatically asking whether you want to initialize the newly found hard drive. Click “OK”
then format this drive as normally you would when adding a new disk.
After disk initialization and formatting, the new drive is attached to your PC. You can
now use this iSCSI target as a regular disk partition.