Operation Manual

594
Activate
Activate an offline target.
Modify
Modify the target settings: target alias, CHAP information, and
checksum settings.
Modify the LUN settings: LUN allocation, name, disk volume
directory, etc.
Delete
Delete an iSCSI target. All the connections will be removed.
Disable
Disable an LUN. All the connections will be removed.
Enable
Enable an LUN.
Un-map
Un-map the LUN from the target. Note that a LUN must first be
disabled before it can be un-mapped. When clicking this button,
the LUN will be moved to the un-mapped iSCSI LUN list.
Map
Map the LUN to an iSCSI target. This option is only available on
the un-mapped iSCSI LUN list.
View Connections
View the connection status of an iSCSI target.
Switching iSCSI LUNs between targets
Follow the steps below to switch an iSCSI LUN between targets:
1. Select an iSCSI LUN to un-map from its iSCSI target.
2. Click “Action” > “Disable”.