Operation Manual

552
Copy” page.
4. Connect the USB device, for example, digital camera or flash, to the front USB port
of the NAS.
5. Press the Copy button once. The data will be copied according to your settings on
the NAS.
Note: Incremental backup is used for this feature. After the first time data backup,
the NAS only copies the changed files since the last backup.
Caution: Files are copied from the source to the destination. Extra files on the
destination will be deleted; files of the same names will be overwritten by the
source. Source data will remain unchanged.
As an external storage drive
When an external device is connected to the front USB port, it will be identified as an
external storage drive connected to the port.