Operation Manual

533
After Symform is activated, you will be able to see the device configuration. Click “Cloud
Dashboard” to have access to Symform Cloud Dashboard and check the status of all the
devices that are running Symform Storage Cloud.
Note about Sym form service:
Web administration interface TCP port: 59234
Contribution TCP port: Defined randomly during Symform setup and can be changed
if necessary.
All TCP outbound ports are mandatory.
The hard drive standby function of the NAS may not work when contribution is in
use, because Symform service always reads and writes data on the hard drives.
Symform with contribution requires network bandwidth. If contribution is enabled,
there will always be communication between the NAS and Symform Cloud. This may
cause network utilization and the bandwidth can be limited as needed.