Operation Manual

468
Remote access
Access the NAS over the Internet
To connect to a remote NAS (over the Internet), the administrator is required to
configure the device name for the NAS in “myQNAPcloud” first (Login the NAS> NAS
Desktop > click the myQNAPcloud shortcut.)
Next, notify the users about the myQNAPcloud web address for their remote access.
You can then use the myQNAPcloud address to login the remote NAS. (e.g.
[e-mail])
Note:
The connection with the NAS over the Internet will take longer, when compared to
a LAN environment.
As you switch back to a LAN environment where your NAS is located, please
connect to the NAS again through LAN, instead of the myQNAPcloud service for
better connection quality.
For better performance on file transmission, it is recommended to configure port
forwarding on the router if possible.
Synchronize photos and videos autom atically
Qsync can synchronize your photos and videos on mobile devices to the Qsync folder
across all Qsync clients automatically.
Steps: