Operation Manual

448
6.2 FTP
FT P Service
When you turn on FTP service, you can specify the port number and the maximum
number of users that are allowed to connect to the NAS by FTP at the same time.
To use the FTP service of the NAS, enable this function. Open an IE browser and enter
ftp://NAS IP. Enter the username and the password to login the FTP service.
Protocol Type:
Select to use standard FTP connection or SSL/TLS encrypted FTP. Select the correct
protocol type in your client FTP software to ensure successful connection.
Unicode Support:
Turn on or off the Unicode support. The default setting is No. If your FTP client does not
support Unicode, you are recommended to turn off this option and select the language
you specify in “General Settings” > “Codepage” so that the file and folder names can be
correctly shown. If your FTP client supports Unicode, enable Unicode support for both
your client and the NAS.
Anonym ous Login:
You can turn on this option to allow anonymous access to the NAS by FTP. The users
can connect to the files and folders which are open for public access. If this option is
turned off, the users must enter an authorized username and password to connect to