Operation Manual

429
Windows Server 2008
Check the AD server name and domain name in “Control Panel” > “System”.
a. This is the AD server name.
b. This is the domain name.
Note:
After joining the NAS to the Active Directory, the local NAS users who have access
right to the AD server should use “NASname\username” to login; the AD users
should use their own usernames to login the AD server.
For TS-109/209/409/509 series NAS, if the AD domain is based on Windows 2008
Server, the NAS firmware must be updated to version 2.1.2 or above.