Operation Manual

425
Join the NAS to Active Directory (AD) by Quick Configuration Wizard
To join the NAS to an AD domain by the Quick Configuration Wizard, follow the steps
below.
1. Go to “Privilege Settings” > “Domain Security”. Select “Active Directory
authentication (domain member)” and click “Quick Configuration Wizard”.
2. Read the introduction of the wizard. Click “Next”.
3. Enter the domain name of the domain name service (DNS). The NetBIOS name will
be generated automatically when you type the domain name. Specify the DNS
server IP for domain resolution. The IP must be the same as the DNS server of your
Active Directory. Click “Next”.