Operation Manual

344
4.10.3 UPS
By enabling the UPS (Uninterruptible Power Supply) support, you can protect your NAS
from abnormal system shutdown caused by power disruption. In the event of a power
failure the NAS will shut down automatically or enter auto-protection mode by probing
the power status of the connected UPS unit.
Standalone m ode – USB
To operate under USB standalone mode, follow the steps below:
1. Plug in the USB cable on the UPS to the NAS.
2. Select the option “Enable UPS Support”.
3. Choose between whether the NAS will shut down or enter auto-protection mode
after AC power fails. Specify the time in minutes that the NAS should wait before
executing the option you have selected. After the NAS enters auto-protection
mode, the NAS resumes the previous operation status when the power restores.
4. Click “Apply All” to confirm.