Operation Manual

302
Firmw are Update
Note: If the system is running properly, you do not need to update the firmware.
Before updating the system firmware, make sure the product model and firmware version
are correct. Follow the steps below to update firmware:
1. Download the release notes of the firmware from the QNAP website http://www.
qnap.com. Read the release notes carefully to make sure it is required to update
the firmware.
2. Download the NAS firmware and unzip the IMG file to the computer.
3. Before updating the system firmware, back up all the disk data on the NAS to avoid
any potential data loss during the system update.
4. Click “Browse” to select the correct firmware image for the system update. Click
“Update System” to update the firmware.
The system update may take tens of seconds to several minutes to complete depending
on the network connection status. Please wait patiently. The NAS will inform you when
the system update has completed.
Update Firmware by Q NAP Qfinder