Operation Manual

279
IPv6 Auto Configuration
If an IPv6 enabled router is available on the network, select this option to allow the NAS
to acquire the IPv6 address and the configurations automatically.
Use static IP address
To use a static IP address, enter the IP address (e.g. 2001:bc95:1234:5678), prefix
length (e.g. 64), and the gateway address for the NAS. You may contact your ISP for
the information of the prefix and the prefix length.
Enable Router Advertisement Daemon (radvd): To configure the NAS as an IPv6 host
and distribute IPv6 addresses to the local clients which support IPv6, enable this
option and enter the prefix and prefix length.
IPv6 DNS server
Enter the preferred DNS server in the upper field and the alternate DNS server in the
lower field. Contact the ISP or network administrator for the information. If IPv6 auto
configuration is selected, leave the fields as “::”.