Operation Manual

278
IPv6
The NAS supports IPv6 connectivity with “stateless” address configurations and RADVD
(Router Advertisement Daemon) for IPv6, RFC 2461 to allow the hosts on the same
subnet to acquire IPv6 addresses from the NAS automatically. The NAS services which
support IPv6 include:
Remote replication
Web Server
FTP
iSCSI (Virtual disk drives)
SSH (putty)
To use this function, select the option “Enable IPv6” and click “Apply”. The NAS will
restart. After the system restarts, login the IPv6 page again. The settings of the IPv6
interface will be shown. Click to edit the settings.