Operation Manual

271
Wi-Fi
To connect the NAS to a Wi-Fi network, plug in a wireless dongle into a USB port of the
NAS. The NAS will detect a list of wireless access points. You can connect the NAS to
the Wi-Fi network in two ways.
Note:
The wireless connection performance depends on many factors such as the adapter
model, the USB adapter's performance, and the network environment. For higher
connection performance, you are recommended to use wired connection.
The system supports only one USB Wi-Fi dongle at a time.
A. Connect to an existing Wi-Fi network:
A list of Wi-Fi access points with signal strength are displayed on the “Wi-Fi Network
Connection” panel.
Icons and Options
Description
Rescan
To search for the Wi-Fi networks in range.
(Secured
network)
This icon shows that the Wi-Fi network requires a network
key; enter the key to connect to the network.
(Connect)
To connect to Wi-Fi network. If a security key is required, you
will be prompted to enter the key.